Palm Beach · South Florida
La Cornue repair in Delray Beach
Older houses near the water and newer builds west of it, so salt exposure varies by a few blocks. It changes what we check first on a unit running warm.
We cover Delray Beach and the rest of Palm Beach: an on-site diagnostic first, the price agreed in writing before anything is opened, and the exact figure confirmed once we have seen the unit.
By unit
What we repair in Delray Beach, by La Cornue unit
Start with whichever matches yours. How an appliance is installed shapes the visit as much as the repair does, which is why we ask about it when you book.
-
Dual fuel · gas · all-induction — Château, Châtelet, Castel, Grand Palais, CornuFé La Cornue range repair in Delray Beach
The range is what La Cornue makes, and everything else in the line exists around it. A Château is built to order in France, arrives in a crate weighing over half a ton, and is assembled from parts a customer chose one at a time: which oven is gas and which is electric, whether the top carries a French top, a lava-rock grill, induction or a teppanyaki plate, which of about fifty enamels, which trim metal. Two of them are almost never identical. That is the first thing a repair on one has to take seriously — the model number tells you the size, and the configuration code tells you what is actually under the lids.
- Dual fuel, all gas or all induction — three different ranges, three parts lists
- The configuration code, not just the model, decides what is on the top
- Made-to-order enamel and trim are part of the job, not an extra
-
Vaulted ovens and convection ovens — gas, electric, and the Tourelle wall oven La Cornue oven repair in Delray Beach
There are three different ovens on this make and they fail in three different ways. The vaulted gas oven cooks by radiant heat inside a sealed dome and has an electric broiler over it. The vaulted electric oven sits on the other side of the same range. And since 2025 there is a standalone one: the Château Tourelle, a fully electric multifunction wall oven in 60 and 75 centimeter widths, built to sit in a cabinet run next to a Château cooktop. Which of the three you have decides everything about the repair.
- Vaulted gas, vaulted electric and the electric Tourelle wall oven
- Gas ovens carry an electric broiler — browning and baking can fail separately
- Thermostat drift is measured against a probe, never adjusted by feel
-
Brass gas burners · plaque coup de feu · lava-rock grill · induction · teppanyaki La Cornue cooktop repair in Delray Beach
A La Cornue cooktop is a set of modules chosen at order time and dropped into a stainless frame: brass gas burners at 17,000 and 7,500 BTU, a 22,000 BTU power burner, the cast-iron plaque coup de feu heated by a single burner underneath, a lava-rock grill, ceramic-glass induction zones, an electric teppanyaki plate. This is the top of a range, and each module is a different repair. Sold on its own without ovens beneath it, the same top is a rangetop, and it has its own page.
- Gas, induction, French top, grill and teppanyaki modules on one frame
- Induction is the only half of this line that shows a code — E2, U400, Er
- A cracked glass hob is disconnected first and diagnosed second
-
T40 to T48 · 200 mm into the counter · the same modules, no ovens beneath La Cornue rangetop repair in Delray Beach
A rangetop is the top half of a La Cornue sold in its own right: the same brass burners, the same plaque coup de feu, the same grill, induction and teppanyaki modules, in a stainless frame 200 mm deep that drops into a counter with nothing underneath it. T40 through T48, from 600 to 1800 mm wide. Every cooktop repair applies to it and no oven repair does — which makes it the simplest appliance in the line and the one most often confused with the range on a booking.
- T40 to T48 — the same configuration codes as the range
- No ovens, no oven thermostats, no door seals
- Much lighter than a range, so the one job that prices weight rarely applies
-
Château motorized hoods H11–H20 · island hoods · inserts · CornuFé Cascade, Euclid, Loge, Marquee La Cornue range hood repair in Delray Beach
The hood over a La Cornue is not an accessory bought to match. A motorized Château hood starts at $17,400 for the 90 and runs past $25,000 for the Grand Palais 180, it is made in the same enamels and trims as the range, and it does real work: a 600 CFM blower on a four-speed variable motor, baffle filters with a grease capture system, three 20-watt lights and a remote. When one stops, the kitchen it was built for stops working properly.
- Motorized Château hoods, island hoods and inserts, plus the CornuFé collection
- 600 CFM blower, four-speed variable motor, baffle filters, remote control
- A hood is finished to match the range — the enamel is part of the repair
By job
The repairs we are called out for in Delray Beach
Starting figures for this equipment in South Florida. What moves them is the model, the access and the part — the exact cost is confirmed after the on-site diagnostic.
-
from $395 Range relocation and leveling
Moving a hand-built French range is a planned job. A Grand Palais 180 is about 710 lb uncrated, the legs are adjustable across half an inch of specified height, and a range that is out of level cooks unevenly in a way that looks exactly like an oven problem.
- Enough people and the right equipment, or it does not get moved
- Leveled to specification and verified with water on the shelf
- Gas and electrical disconnected and reconnected properly, not stretched
-
from $325 Induction hob repair
The three codes La Cornue documents anywhere all live here: E2, the electronics are too hot; U400, the cooker is incorrectly connected; Er with a number, an internal problem the user cannot clear. Everything else on that display is an indicator, and telling the two apart saves a visit.
- E2 is investigated as ventilation first, as the maker's own guide says
- Indicators — H, the pan-missing symbol, L, A, P — are not problems
- Zone-by-zone testing with pans that meet the minimum diameters
-
from $195 Appliance maintenance
An annual visit that exists because most of what goes wrong on this make goes wrong slowly. Burners drift rich, thermostats drift hot, baffles saturate, brass tarnishes, and the owner adapts to every one of them without noticing. This is the visit that measures instead of adapting.
- Burner combustion and oven calibration checked against specification
- Baffle filters, duct flow and blower condition on the hood
- Enamel, trim and seals inspected while they are still repairable
-
from $265 Enamel panel and trim service
Vitreous enamel is glass fused to steel and about fifty colors of it were available at order time. A chip is not cosmetic in this climate — the steel under it rusts outwards — and a tarnished brass handrail attacked with the wrong product loses its lacquer along with the tarnish.
- Chips stabilized or the part ordered in the range's own color reference
- Brass, copper, nickel and chrome trim treated by what they actually are
- Clear-coated finishes identified before anything is polished
-
from $595 Induction glass replacement
The one problem on this make with a safety instruction attached. La Cornue's guide is unambiguous: a cracked hob is disconnected from the power supply immediately and not used until it has been repaired, because the glass is what separates the coils and the electronics from whatever is spilled on it.
- Made safe first, diagnosed second
- Glass ordered to the range's own configuration, not a generic panel
- Coils and electronics inspected for what has already got through the crack
-
from $295 Appliance installation
A Château is delivered in a crate that can weigh 1,320 lb and is leveled to a specification, not to a spirit level held by eye. Installation covers gas, electrical, leveling, hood duct and the first-use check — and it covers the paperwork, because altitude, fuel type and voltage are specified at order time and have to match what is actually in the house.
- Gas and electrical to the maker's own requirements document
- Leveled to specification — a dish of water sits at one depth all over
- First-use check, and the hood duct measured rather than assumed
Nearby
Where else we work near Delray Beach
Every place below has its own page, with what the equipment and the access are like there.
Elsewhere in Palm Beach
In more detail
La Cornue repair in Delray Beach, in more detail
What La Cornue equipment is like in Delray Beach
Older houses near the water and newer builds west of it, so salt exposure varies by a few blocks. It changes what we check first on a unit running warm.
Delray Beach sits in Palm Beach County, and the equipment here follows the housing: older kitchens with appliances fitted into openings that were cut for something else, and newer ones where they were specified with the cabinetry. Both are La Cornue work — cooktops and rangetops, ovens, range hoods — and both are diagnosed on site before anything is priced.
Salt, heat and storms — what they do to burners and vents
Close to the water it is the steel and the ignition that go first. Salt reaches burner caps, grates and igniter electrodes, and an igniter that has to spark through corrosion is an igniter that clicks and does not light. Ventilation suffers with it: a hood that pulls salt air through its motor every day is on a shorter life than the one the manufacturer costed. In Delray Beach that is the difference between an annual clean and a seasonal one.
What that means for the appliances in Delray Beach
- Ovens — A wall oven fitted into original joinery has a fixed opening and a circuit that may be older than the appliance. Both get checked before anything is quoted.
- Yellow or orange flame
- Stiff or stuck burner knob
- Induction zone not heating
- Oven not reaching temperature
- Hood suction has faded
How a visit in Delray Beach is arranged
We ask for the model number from the plate inside the door and a line about what the appliance is doing. That decides which parts ride in the van, and it is the difference between one appointment and two.
- In a building: the service elevator window, the loading bay and the hours contractors are allowed to work
- Behind a gate: how visitors are cleared, arranged before the appointment rather than at it
- Whether the gas is propane or natural, which decides the orifices and the parts that ride in the van
- The diagnosis first, then the scope and the price in writing, and your approval before anything is opened
What it costs, and what moves the figure
Prices in Delray Beach are the same as everywhere else we cover: a diagnostic from $95 that is credited toward the repair, and starting figures per job rather than one number for "a repair". What moves it is the model, how the appliance is built into the cabinetry, which part it needs and how quickly that part can be sourced — none of which can be judged over the phone. The repairs we carry out lists what each job involves and the figure it starts at, and the unit pages covers what tends to go wrong on each type.
The exact cost is confirmed after the on-site diagnostic and agreed with you before any work begins. We are an independent repair company — not affiliated with, authorized by, or endorsed by any manufacturer — and our warranty covers the labor we performed.
Before you book
Questions about a visit in Delray Beach
Do you cover Delray Beach?
Yes. Delray Beach is in Palm Beach County and inside the area we work every week. Give us the address when you book, and say how the La Cornue is installed — what has to come apart to reach it matters as much as where it is.
How soon can you get to Delray Beach?
We will tell you the earliest slot we can genuinely keep rather than the earliest one that sounds good. Tell us the model number and what the unit is doing when you book: whether we can finish the same day depends on the part far more than on the drive.
Does it cost more because the job is in Delray Beach?
No. The diagnostic and the work are priced the same across Miami-Dade, Broward and Palm Beach. What moves the figure is the model, how the unit is built in and which part it needs — never the address. Where access takes longer, we say so before anything is agreed rather than after.
Does being this close to the water shorten the life of a unit?
It shortens the life of the condenser and the fan motors, which is not the same thing. Salt corrodes them years ahead of the schedule written for a dry climate, and a condenser that cannot shed heat makes the compressor work longer for the same result. Cleaning here is seasonal rather than annual.
Booking a visit in Delray Beach
Tell us the model number and what the unit is doing. We will bring the parts that problem usually needs, and you will have a firm price before we start.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards