Repair cost
La Cornue surface burner and igniter service cost
Electrodes, ceramics, burner caps and crowns — inexpensive parts, and the commonest gas call on this make. What varies is how many burners are involved and whether anything was cleaned recently.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
The short version
Where this figure comes from
A starting point for built-in cooking appliances in South Florida, published so the number is not a mystery until somebody is standing in your kitchen.
Starts at
from $155
After a diagnostic from $95, which comes off the bill when you go ahead with the work.
or call (305) 614-3699
It is not
A quote for your unit
Exact cost
Confirmed after the on-site diagnostic
Warranty
On the labor we performed
What moves it
Why two of the same job cost different amounts
These apply at the same time and in both directions. Which of them is true of your kitchen is what the on-site diagnostic settles.
-
How many burners
One is local and cheap. All of them points at the module or the supply, and that is a bigger part.
-
Which module
A plaque burner or a grill burner is out of sight and takes longer to reach than a surface burner.
-
What caused it
Moisture after a cleaning costs nothing to correct. A cracked ceramic is a part.
-
Whether the ports are damaged
Cleared, they cost nothing. Enlarged by somebody's wire, the crown is a part.
-
Fuel
A range converted to propane with approximate parts turns this into the conversion job instead.
The work itself
What we actually do
The job behind the figure: what it involves, when a symptom points at it, and what we check first.
-
from $155 Surface burner and igniter service
Clicking with no flame, a burner that lights and will not stay lit, a lazy yellow flame. On brass burners in a coastal kitchen these are three symptoms of a short list of causes, and none of them is the ignition module when only one burner is affected.
- One burner out is the electrode or the ports — not the module
- Yellow flame is air mix, fuel or an orifice, and it is measurable
- Ports cleared properly rather than poked at
In more detail
About La Cornue surface burner and igniter service cost
Why this is the cheapest real repair on the range
Because the parts are small and the access is from the front. An electrode, a ceramic, a burner cap and crown are components you can hold in one hand, and on a range designed to be serviced for decades they are meant to be replaced. What pushes the figure up is quantity — a range where every electrode has aged out at once — or a diagnosis that turns out to be the ignition module or the gas supply rather than the burner.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about La Cornue surface burner and igniter service cost
Is it cheaper if I take the burner apart before you come?
No, and please do not. What genuinely helps is telling us how many burners are affected and whether anything was cleaned in the last few days — that is the difference between bringing an electrode and bringing an ignition module. Taking a burner apart and leaving it apart mostly adds reassembly to the visit.
The burner works with a match. Cheaper?
Usually yes, because it tells us the gas train and the valve are fine and the problem is purely in the ignition. That is the low end of this figure. Say it when you book.
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name