Error code
La Cornue range: an unusually hot fascia points at the range’s cooling fan, and that is a repair
La Cornue — an indicator rather than a code. This is the most specific and least known entry in the whole of La Cornue's troubleshooting section, and it is worth reading before you decide a hot control panel is normal.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Signal Fascia is excessively hot, from the manufacturer's own documentation
This code has no number, because this equipment has no display to put one on. The appliance signals it instead — an alarm, a symbol or a pattern of lights — and what it means is recorded in the documentation that ships with it.
The signal
Fascia is excessively hot
This is the most specific and least known entry in the whole of La Cornue's troubleshooting section, and it is worth reading before you decide a hot control panel is normal. The range is cooled by a fan. If the fascia becomes excessively hot while the range is in use, the guide says the cooling fan may have failed and directs the owner to arrange for its repair. Hot knobs are a separate and normal matter; an excessively hot fascia is a component that has stopped.
or call (305) 614-3699
What it narrows down to
the cooling fan may have failed
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the ranges
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
the hob electronics are too hot and have shut down
the electrical connection is wrong and the hob has latched off
an internal problem that needs a technician
no display, which the maker puts down to the supply
the protective device keeps operating and that is a test, not a reset
it will not switch on, and both of the maker's checks are upstream
the zone is still hot — an indicator, not a problem
the zone cannot see a suitable pan, and pan size is the usual reason
disconnect it immediately and do not use it until it is repaired
pan noise on induction is normal at high power
scratches do not come out, and pan bases are usually the cause
the flame safety device is not holding in
The same digits mean different things on different equipment. Search the full code list
In more detail
About La Cornue range: an unusually hot fascia points at the range’s cooling fan, and that is a repair
What the appliance is actually doing
This is the most specific and least known entry in the whole of La Cornue's troubleshooting section, and it is worth reading before you decide a hot control panel is normal. The range is cooled by a fan. If the fascia becomes excessively hot while the range is in use, the guide says the cooling fan may have failed and directs the owner to arrange for its repair. Hot knobs are a separate and normal matter; an excessively hot fascia is a component that has stopped.
Quoted rather than interpreted
The range is cooled by a fan. If the fascia becomes excessively hot when the range is in use then the cooling fan may have failed.
From the CornuFé 110 dual fuel installation and user guide (U107101-21e), in a User Guide & Service Manual downloaded from La Cornue's own site. Nothing on this page is decoded beyond what that sentence says.
Which machines this one applies to
La Cornue gas and dual fuel ranges. La Cornue publishes three codes in the whole of its US documentation and its Château guide carries no troubleshooting section, so a behavior missing from this archive is not proof that your appliance cannot do it — the maker simply never wrote a table for it. What its guides do document, they document in sentences, and those are on this site under the maker's own wording. The model number, and which top the range was ordered with, settle what any of it means.
What to do about it
- Compare it with how it used to be. This is a change, not a state.
- Listen for the cooling fan while the oven is running — an absence you can hear is the diagnosis.
- Note whether it happens with the oven, the broiler or both.
- Do not keep using it heavily. The fan exists to protect the controls behind that fascia.
- Have it looked at rather than lived with. This is one of the few conditions the maker itself escalates immediately.
Where this goes next
The job this usually becomes is diagnostic visit, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 614-3699 and describe what the display is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards